Mono silicon pv module 630W

Benefits of solar photovoltaic power generation:

1.the solar energy is inexhaustible, the earth surface receives solar radiation energy, can meet the daily demand of electricity 10,000 times. Just 4 percent of the desert could be covered by solar photovoltaic systems, generating enough electricity to meet daily needs. Solar power is not vulnerable to energy crises or fuel market instability;
 2. the solar energy can be anywhere, can be nearby power supply, do not need to long-distance transmission, avoid the loss of long-distance transmission lines;
 3.solar energy does not use fuel, the operation cost is very low;
 4.solar power generation has no moving parts, not easy to use damage, simple maintenance, especially suitable for unattended use;
 5.solar power generation will not produce any waste, no pollution, noise and other public hazards, no adverse impact on the environment, is the ideal clean energy;
 6.solar power generation system construction cycle is short, convenient and flexible, and according to the load increase or decrease, arbitrary add or reduce the solar array capacity, avoid waste.   

High power, high efficiency, high reliability and high power generation are the four core elements of photovoltaic module products. 600W+ module series is just such a product, which fully meets this requirement. In the two years of practical application has been fully verified, in the production, manufacturing, system and other aspects of the cost has been reduced. 600W+ high power components have been fully industrialized. On the basis of 210 silicon wafers, the use of MBB, lossless cutting, high-density packaging and other technological innovations to improve the power, efficiency, power generation capacity and reliability of components.
In order to reduce the hidden cracks and other defects caused by the production, transportation, installation and construction of the battery, we comprehensively apply the advanced non-destructive cutting technology, and the mechanical strength of each smallest battery unit reaches the highest level, so that the resistance to hidden cracks of 600W+ ultra-high power components has a qualitative leap compared with conventional products in the industry. At the same time, it ensures that the components can withstand all kinds of bad weather in the operating environment of the power station, and can calmly cope with all kinds of extreme climate such as strong wind, heavy snow, extreme cold and hail.  

A solar cell can produce only about 0.5V of voltage, far less than what is needed for actual use. To meet the needs of practical applications, solar cells need to be connected into modules. A solar cell module comprises a number of solar cells connected by wires. For example, the number of solar cells in a module is 36, which means that a solar module can produce a voltage of about 17V. High-power 600w+ series products highlight our production technology.When the application field requires high voltage and current, a single component cannot meet the requirements, multiple components can be assembled into a solar cell array to obtain the required voltage and current.


Necessary components of the entire solar power supply system:
The solar power generation system consists of solar cell module, solar controller and storage battery (group). If the output power supply is 220V or 110V, you need to configure an inverter. The roles of each part are:
(I) Solar cell modules: Solar cell modules are the core part of the solar power supply system and also the valuable part of the solar power supply system. Its role is to convert the sun’s radiation energy into electricity, or sent to storage batteries, or to promote the work of the load.
(2) Solar controller: the role of the solar controller is to control the working state of the whole system, and to play the role of over-charge protection and over-discharge protection of the battery. In the place where the temperature difference is large, the qualified controller should also have the function of temperature compensation. Additional functions such as light switches and time switches should be optional to the controller.
(3) Battery: generally lead-acid battery, small and miniature system, can also be nickel metal hydride battery, nickel cadmium battery or lithium battery. Its purpose is to store the power provided by the solar modules when the light is shining, and release it when it is needed.
(4) Inverter: In many occasions, it is necessary to provide 220VAC, 110VAC AC power supply. Because the direct output of solar energy is generally 12VDC, 24VDC, 48VDC. In order to provide electric energy for 220VAC appliances, it is necessary to convert the DC power supplied by the solar power system into AC power, so a DC-AC inverter is needed. The DC-DC inverter is also used in some situations where multiple voltage loads are required, such as converting 24VDC power to 5VDC power (note, not simple step-down).

Features of Mono silicon pv module 630W:
1.High module conversion efficiency
Module efficiency up to 22.8% achieved through advanced cell technology and manufacturing process 
2.Lower operating temperature
Lower operating temperature and temperature coefficient increases the power output
3.GT Solar current sorting process
Up to 2% power loss caused by current mismatch could be diminished by current sorting technique to maximize system power output 
4.Extended wind and snow load tests
Module certified to withstand extreme wind (2400 Pascal) and snow loads (5400 Pascal) *
5.Excellent weak light performance
More power output in weak light condition, such as cloudy, morning and sunset 
6.Withstanding harsh environment
Reliable quality leads to a better sustainability even in harsh environment like desert, farm and coastline


Industry-leading Warranty：


Mechanical Characteristics：

Electrical characteristics ：

Temperature Characteristics：